This is a Monster Size Website, please give it a couple of minutes to load up. My New Still, Tell Them S. M. Stafford Sent YOU To Buy
top of page

My New Still, Tell Them S. M. Stafford Sent YOU To Buy

18 hours ago

4 min read

1

171

0








40 gallon Complete Distillers Kit

Brand: Vengeance Stills

Search this page

No better price found

Complete Distillers kit for the distilling hobbyist OR starter test still system for a craft distillery.

40 Gallon Hand Crafted Still

EZ Clamp locking system

Electric Upgrade includes a built in copper bung housing for the element. -5500 Watt 220 volt Variable Power Controller

5 Gallon Copper Thumper with fruit port -5 Gallon Condenser Worm with built in proofing parrot -Includes lines and fittings to connect the system

Hydrometer -Alcoholmeter - Turbo Distiller's Yeast-Bag of Toasted Oak Chips

Report an issue with this product or seller





Product Description

Everything you need to get started in the art of craft distilling. This is an assembly of our best upgrades to enable the new distiller to master the art with ease. Complete Distillation 40 Gallon Kit Includes: -40 Gallon Hand Crafted Still -EZ Clamp locking system. Allows the cap to be sealed to the pot without the need of a flour water paste. No messy cleanup afterwards -Heavy Duty T-Handle Drain -Electric Upgrade includes a built in copper bung housing for the element. -5500 Watt Variable Power Controller -5 Gallon Copper Thumper with fruit port -5 Gallon Condenser Worm with built in proofing parrot -Includes connection lines and fittings to connect the system -Hydrometer -Alcoholmeter -Hardware Connection Kit -Bag of Toasted Oak Chips to age you shine in turning it into Whiskey in 90-days. 1 cup of chips per gallon of shine. Put away in a sealed container for 90-days, open and enjoy. -Mash Transfer Pump, also can be used in conjunction with the worm to circulate water to improve condensing efficiency. -Enough yeast for 40 gallons of mash





Top

About this item

Similar

From the Brand

Product information

Questions

Reviews

40 gallon Complete Distillers Kit



40 gallon Complete Distillers Kit

Product information

Package Dimensions 48 x 16 x 16 inches

Item Weight 15 pounds

Manufacturer Vengeance Stills

ASIN B0CWVW3X89

UNSPSC Code 52150000 (Domestic kitchenware and kitchen supplies) Report an incorrect code

Item model number 20galdk

Best Sellers Rank

#2,195,181 in Kitchen & Dining (See Top 100 in Kitchen & Dining)

#380 in Wine Making Starter Sets

Date First Available February 13, 2018



The Vengeance Stills 40 Gallon Distillation Kit is made of copper. The still features:

  • 40 Gallon Hand Crafted Copper Still - main distillation vessel

  • 5 Gallon Copper Thumper with fruit port for flavor enhancement

  • Built-in copper bung housing for the heating element

  • Copper condenser worm with built-in proofing parrot

The copper construction provides excellent heat conductivity and helps remove sulfur compounds during distillation, which is essential for producing quality spirits.



Setting up the Vengeance Stills 40 Gallon Distillation Kit involves several key steps:

Basic Assembly:

  • Connect the 40-gallon main still to the 5-gallon copper thumper using included lines and fittings

  • Attach the condenser worm with built-in proofing parrot to complete the distillation path

  • Install the 5500-watt variable power controller and heating element in the copper bung housing

  • Use the EZ Clamp locking system to secure the cap to the pot (no flour paste needed)

Important Legal Disclaimer: Before using any distillation equipment, please check federal, state, and local laws regarding home distillation. In the US, distilling alcohol requires proper permits and licenses. This equipment may be intended for water




Here are essential safety guidelines for operating the Vengeance Stills 40 Gallon Distillation Kit:

Electrical Safety:

  • The 5500-watt variable power controller requires proper 220-volt electrical installation by a qualified electrician

  • Ensure proper grounding and use GFCI protection

  • Never operate electrical components near water or in wet conditions

Heat & Fire Safety:

  • Always maintain proper ventilation during operation






For the electrical installation of the Vengeance Stills 40 Gallon Distillation Kit, here are important requirements:

Electrical Requirements:

  • 5500-watt variable power controller requires 220-volt service

  • This is a high-amperage device (approximately 25 amps) that needs dedicated wiring

  • Must be installed by a licensed electrician to meet local codes

  • Requires proper grounding and GFCI protection for safety

Important Disclaimer: I can't provide professional electrical advice. The high power draw of this equipment requires proper electrical installation that meets local building codes and safety standards. Improper installation can cause fires, electrical shock, or equipment damage.

Professional Installation Required:

  • Contact a licensed electrician for assessment and installation

  • Ensure your electrical panel can handle the additional 25-amp load

  • May require dedicated circuit breaker and appropriate gauge wiring

  • Installation must comply with local electrical codes

Always consult with qualified professionals before installing high-power electrical equipment.

...See more





For the Vengeance Stills 40 Gallon Distillation Kit, here are alternative power considerations:

Current Power System:

  • Includes a 5500-watt variable power controller (220-volt)

  • This provides precise temperature control for consistent distillation

Alternative Approaches:

  • Gas burner systems - Some distillers use propane burners, though temperature control is more challenging

  • Lower wattage electric elements - Would require longer heating times but lower electrical demands

  • Steam injection systems - Used in commercial operations but complex for home setups

Important Considerations: The included 5500-watt controller is specifically designed for this 40-gallon capacity. Alternative power sources would likely require:

  • Modifications to the still design

  • Different temperature control methods

  • Potentially longer processing times

  • May void any warranty coverage

Professional Recommendation: The electrical installation by a qualified electrician remains the safest and most effective approach for this particular still design.

...See more

18 hours ago

4 min read

1

171

0

Related Posts

Comments

Share Your ThoughtsBe the first to write a comment.

S. M. Stafford

P.O. Box 293

Lamar, MO 64759 USA 

Teamsterstransp.png
bottom of page